3D Bumblebees Paper Craft

براي پرينت روي عكسها كليك كنيد 

Materials: printer, paper, scissors, something to color with (if using the B&W version), hole punch, string, thread, ribbon or wool.   Optional:  thin cardboard

Instructions:

• Print template of choice and color as necessary.
   
• Cut out the template pieces.
   
• Fold each piece in half (on the dashed line) so they are all colored on both the front and the back.
   
• Optional:  Put thin cardboard in between the front and back of each template piece to make them a bit sturdier.
   
• Glue together so the pieces are colored on both sides.
   
• 3D Bumblebees:
   
  • Cut on one of the dotted lines of each template piece (only cut as far as the dotted line goes, not all the way through the piece).
     
  • Slide the pieces together, top to bottom  
  • Glue a piece of ribbon, string or thread onto the top (or hole punch a small hole and tie a ribbon through).  If you hole punch, do it through the bee that is cut from the bottom, not the one that is cut from the top.
     
• Beehive:
   
  • punch three holes in the bottom of the beehive template (one in the center and one on each edge).
     
  • String one bumblebee through each of the holes so it hangs down from the hive.
     
  • Punch a hole in the bottom of the middle bumblebee and string the fourth bumblebee through that hole
    .
     
• Optional:
   
  • Print as many copies of template 3 as you like and keep adding bumblebees to the bottom of the other bumblebees and the hive to make a very busy beehive!
     
  • 'numbers practice' -- count the bees.
     
  • 'colors practice' -- color the background of each bee a different color.